Many workers are overexposed to noise, either from their own work or from ambient noise.
In time, overexposure decreases our ability to hear. Older workers might confuse work-related hearing loss with hearing loss due to aging.
It is possible to slow down or stop noise-induced hearing loss by taking precautions.
It’s important to know that overexposure to noise doesn’t necessarily take a long time. Short periods of very high noise can cause overexposure.
For example, working for only 15 minutes with a gas-powered quick-cut saw will lead to overexposure for that day.
Noise is generally measured in decibels (dB). The scale commonly used to measure noise that may harm human hearing is the A scale. Decibels on the A scale are therefore described as dBA.
You should wear hearing protection if you’re exposed to noise levels such as:
Most power tools and equipment used in construction operate well over these levels.
Since it’s difficult to reduce noise levels on site, the next best choice is hearing protection.
The two main types of hearing protection are muffs and plugs. They each have advantages and disadvantages but generally ear muffs provide better protection.
Plugs and muffs should have a Noise Reduction Rating (NRR) printed on the packaging. This is the reduction the protection will provide in an ideal situation. In the real world, the reduction may only be half of the printed NRR.
In New Brunswick, the law on noise and hearing protection can be found in General Regulation 91-191 under the Occupational Health and Safety Act, sections 29 – 33, 38 and 48.